Loner-StrikeReference

Reference

World

36 Game Mode Studio nodes. Pick one for its pins, settings and limits.

valueGravityHow strongly everyone falls (800 normal).actionSet GravityHow strongly everyone falls (800 normal).valueFrictionHow quickly players stop sliding (4 normal).actionSet FrictionHow quickly players stop sliding (4 normal).valueMax SpeedThe fastest anyone can run (320 normal).actionSet Max SpeedThe fastest anyone can run (320 normal).valueRound TimeMinutes a round lasts.actionSet Round TimeMinutes a round lasts.valueFreeze TimeSeconds frozen at a round's start.actionSet Freeze TimeSeconds frozen at a round's start.valueBuy TimeMinutes players can buy after the round starts.actionSet Buy TimeMinutes players can buy after the round starts.valueFriendly FireCan teammates hurt each other?actionSet Friendly FireCan teammates hurt each other?valueTeam BalanceDoes the game move players to even the teams?actionSet Team BalanceDoes the game move players to even the teams?valueTeam LimitHow many more players one team may have (0: no limit).actionSet Team LimitHow many more players one team may have (0: no limit).valueStart MoneyMoney at the start.actionSet Start MoneyMoney at the start.valueC4 TimerSeconds until a planted bomb explodes.actionSet C4 TimerSeconds until a planted bomb explodes.valueFall DamageFalls hurt (realistic) or not.actionSet Fall DamageFalls hurt (realistic) or not.valueFootstepsCan footsteps be heard?actionSet FootstepsCan footsteps be heard?valueAll TalkCan everyone hear everyone's voice?actionSet All TalkCan everyone hear everyone's voice?valueTime LimitMinutes before the map changes (0: none).actionSet Time LimitMinutes before the map changes (0: none).valueWin LimitRounds won before the map changes (0: none).actionSet Win LimitRounds won before the map changes (0: none).valueFrag LimitKills before the map changes (0: none).actionSet Frag LimitKills before the map changes (0: none).actionSet WeatherRain, snow or clear weather for everyone or one player, kept through respawns (Counter-Strike 1.6 and Condition Zero draw it; how much depends on the player's settings).actionSet FogFog of a color and thickness for everyone or one player (0 thickness: none), kept through respawns.

Set Gravity

actionworld.set_gravity

How strongly everyone falls (800 normal). (sv_gravity)

Inputs (2)
Run Flow
Runs this node.
Gravity Number
Gravity: a number. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
Gravity
A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 800.

Set Friction

actionworld.set_friction

How quickly players stop sliding (4 normal). (sv_friction)

Inputs (2)
Run Flow
Runs this node.
Friction Number
Friction: a number. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
Friction
A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 4.

Set Max Speed

actionworld.set_max_speed

The fastest anyone can run (320 normal). (sv_maxspeed)

Inputs (2)
Run Flow
Runs this node.
Max Speed Number
Max Speed: a number. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
Max Speed
A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 320.

Set Round Time

actionworld.set_round_time

Minutes a round lasts. (mp_roundtime)

Inputs (2)
Run Flow
Runs this node.
Round Time Number
Round Time: a number. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
Round Time
A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 2.5.

Set Freeze Time

actionworld.set_freeze_time

Seconds frozen at a round's start. (mp_freezetime)

Inputs (2)
Run Flow
Runs this node.
Freeze Time Number
Freeze Time: a number. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
Freeze Time
A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 6.

Set Buy Time

actionworld.set_buy_time

Minutes players can buy after the round starts. (mp_buytime)

Inputs (2)
Run Flow
Runs this node.
Buy Time Number
Buy Time: a number. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
Buy Time
A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 0.25.

Set Friendly Fire

actionworld.set_friendly_fire

Can teammates hurt each other? (mp_friendlyfire)

Inputs (2)
Run Flow
Runs this node.
Friendly Fire Yes/No
Friendly Fire: yes or no. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
Friendly Fire
On or off. A wire into the pin of the same name is used instead. Default: false.

Set Team Balance

actionworld.set_team_balance

Does the game move players to even the teams? (mp_autoteambalance)

Inputs (2)
Run Flow
Runs this node.
Team Balance Yes/No
Team Balance: yes or no. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
Team Balance
On or off. A wire into the pin of the same name is used instead. Default: true.

Set Team Limit

actionworld.set_team_limit

How many more players one team may have (0: no limit). (mp_limitteams)

Inputs (2)
Run Flow
Runs this node.
Team Limit Number
Team Limit: a number. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
Team Limit
A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 2.

Set Start Money

actionworld.set_start_money

Money at the start. (mp_startmoney)

Inputs (2)
Run Flow
Runs this node.
Start Money Number
Start Money: a number. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
Start Money
A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 800.

Set C4 Timer

actionworld.set_c4_timer

Seconds until a planted bomb explodes. (mp_c4timer)

Inputs (2)
Run Flow
Runs this node.
C4 Timer Number
C4 Timer: a number. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
C4 Timer
A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 35.

Set Fall Damage

actionworld.set_fall_damage

Falls hurt (realistic) or not. (mp_falldamage)

Inputs (2)
Run Flow
Runs this node.
Fall Damage Yes/No
Fall Damage: yes or no. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
Fall Damage
On or off. A wire into the pin of the same name is used instead. Default: true.

Set Footsteps

actionworld.set_footsteps

Can footsteps be heard? (mp_footsteps)

Inputs (2)
Run Flow
Runs this node.
Footsteps Yes/No
Footsteps: yes or no. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
Footsteps
On or off. A wire into the pin of the same name is used instead. Default: true.

Set All Talk

actionworld.set_alltalk

Can everyone hear everyone's voice? (sv_alltalk)

Inputs (2)
Run Flow
Runs this node.
All Talk Yes/No
All Talk: yes or no. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
All Talk
On or off. A wire into the pin of the same name is used instead. Default: false.

Set Time Limit

actionworld.set_time_limit

Minutes before the map changes (0: none). (mp_timelimit)

Inputs (2)
Run Flow
Runs this node.
Time Limit Number
Time Limit: a number. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
Time Limit
A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 20.

Set Win Limit

actionworld.set_win_limit

Rounds won before the map changes (0: none). (mp_winlimit)

Inputs (2)
Run Flow
Runs this node.
Win Limit Number
Win Limit: a number. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
Win Limit
A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 0.

Set Frag Limit

actionworld.set_frag_limit

Kills before the map changes (0: none). (mp_fraglimit)

Inputs (2)
Run Flow
Runs this node.
Frag Limit Number
Frag Limit: a number. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
Frag Limit
A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 0.

Set Weather

actionworld.weather

Rain, snow or clear weather for everyone or one player, kept through respawns (Counter-Strike 1.6 and Condition Zero draw it; how much depends on the player's settings).

Inputs (2)
Run Flow
Runs this node.
Player (empty: everyone) Player
Player (empty: everyone): a player. Optional.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
Weather
Pick one: Clear, Rain, Snow. Default: rain.
Limits (1)
Effect messages a frame
48 by default; hosts can raise it to 64. Above 56 the server may slow down.
Notes (1)

Players with weather effects turned off in their options see nothing; it's only looks (no sounds, no slowdown).

Set Fog

actionworld.fog

Fog of a color and thickness for everyone or one player (0 thickness: none), kept through respawns. It depends on the player's renderer: OpenGL draws it, software mode doesn't.

Inputs (2)
Run Flow
Runs this node.
Player (empty: everyone) Player
Player (empty: everyone): a player. Optional.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (4)
Red
A number from 0 to 255. Default: 128.
Green
A number from 0 to 255. Default: 128.
Blue
A number from 0 to 255. Default: 128.
Thickness
A number from 0 to 0.05. Default: 0.002.
Limits (1)
Effect messages a frame
48 by default; hosts can raise it to 64. Above 56 the server may slow down.
Notes (2)

OpenGL draws fog; the software renderer doesn't. Thickness 0.001 to 0.005 is a light haze; 0.02 and up hides things a short way off.

Careful: Thick fog hides players from people but not from bots.

Made from the app's own catalog (nodes.json, nodehelp.json, limits.ts), so it matches the app.