Reference
Effects
21 Game Mode Studio nodes. Pick one for its pins, settings and limits.
action Explosion An explosion at a position: the look and sound, and damage to players within the radius (0: none). action Beam A beam of light from one position to another for some seconds. action Set Light Style How bright the whole map is: normal, dark, darkest, bright, or flickering. action Objective Marker A sprite that floats over an entity (wired into Follow: a player, an NPC, an interactable, a component; it follows it) or at a position, for everyone, one team or one player. action Remove Marker Takes away an Objective Marker (the one wired in, or all of them with none). action Trail A colored trail behind a player or an entity as it moves (on), or none (off). action Effect Burst A burst at a position or an entity: sparks, smoke, blood, a firework, an implosion, a tar explosion, a teleport flash, a lava splash or a colored flash. action Beam Between Entities A beam from one player or entity to another that follows both as they move, for some seconds. action Icon Over Player A sprite floating over a player's head (the game's own, like sprites/iplayervip.spr, or your own), for some seconds or until removed (0), seen by everyone, a team or only Viewer. action Sprite At Shows a sprite once at a position or an entity (the game's own or your own), at a size and brightness. action Tracer A bullet tracer streak from one position to another. action Dynamic Light A light that brightens what's around it for a moment: at a position, or following an entity (a player, a projectile) for the seconds given. action Decal Puts a decal (a scorch, blood, a bullet hole...) on the surface nearest a position: it looks six ways from the point within Reach and paints the closest wall, floor or ceiling, or a door it hits. action Break Into Gibs Pieces fly out from a position or an entity's middle, as when something breaks: wood, glass, metal, rocks, flesh, or your own model's parts (Custom model). action Beam Ring A ring that grows out from a point, like a shockwave: radius, color, how long and how thick. action Play Sound 2D A sound heard as is, not from a place: by one player, a team or everyone. action Play Sound at Location A sound from a place (a position, or where an entity is now), heard louder close by. action Play Sound on Entity A sound that comes from an entity or a player and moves with it, on a channel (a new sound on the same channel replaces the last one). action Loop Sound A sound that keeps playing at a spot, or riding on an entity, until Stop Sound gets its Handle (or the round ends with the entity). action Stop Sound Stops a Loop Sound (its Handle), whatever plays on an entity's channel, or every sound a player hears now. action As Objective Marker Casting: is this entity an objective marker?
action fx.explosion Copy link
An explosion at a position: the look and sound, and damage to players within the radius (0: none).
Inputs (3) Run Flow Runs this node. Position Vector The position. Needs a wire. Damage Number How much it hurts players near it (0: only the look and sound). Outputs (1) Then Flow Goes on when it's done. Settings (2) Damage A number from 0 to 500. A wire into the pin of the same name is used instead. Default: 0. Radius A number from 16 to 2000. Default: 250. Notes (1) Careful: With damage, it can kill players, and those count as deaths by the world.
Beam
From To Color (wins over the setting)
A beam of light from one position to another for some seconds.
Inputs (4) Run Flow Runs this node. From Vector From: a position or direction (X, Y, Z). Needs a wire. To Vector To: a position or direction (X, Y, Z). Needs a wire. Color (wins over the setting) Color A color to use instead of the Color choice: wire a Color node (pick it with its picker), Make Color or a Color variable. Not wired: the Color choice. Outputs (1) Then Flow Goes on when it's done. Settings (2) Color Pick one: Red, Green, Blue, White, Gold. Default: red. Seconds A number from 0.1 to 25. Default: 1.
How bright the whole map is: normal, dark, darkest, bright, or flickering.
Inputs (1) Run Flow Runs this node. Outputs (1) Then Flow Goes on when it's done. Settings (1) Light Pick one: Normal, Dark, Darkest, Bright, Flickering. Default: normal. Notes (1) Changes the light of the whole map for everyone, until set back to Normal or the map changes.
Objective Marker
Follow Position Player (for one player) Color (wins over the setting) Sprite
A sprite that floats over an entity (wired into Follow: a player, an NPC, an interactable, a component; it follows it) or at a position, for everyone, one team or one player. The sprite is one of the game's (sprites/arrow1.spr) or your own (sprites/...spr: it goes with the mode, like its other files). Remove it with Remove Marker; it goes by itself when what it follows is gone.
Inputs (6) Run Flow Runs this node. Follow Entity Follow: an entity (a thing in the map). Position Vector The position. Optional. Player (for one player) Player Player (for one player): a player. Optional. Color (wins over the setting) Color A color to use instead of the Red, Green and Blue settings: wire a Color node (pick it with its picker), Make Color or a Color variable. Not wired: the Red, Green and Blue settings. Sprite Sprite The sprite. Leave it empty to use the setting. Outputs (2) Then Flow Goes on when it's done. MarkerM Objective Marker Marker: an objective marker (an Objective Marker handle). Settings (8) Sprite Picked from this mode's own pieces. A wire into the pin of the same name is used instead. Default: sprites/arrow1.spr. Seen by Pick one: Everyone, Terrorists, Counter-Terrorists, The wired player. Default: all. Height above A number from 0 to 512. Default: 48. Size A number from 0.05 to 5. Default: 0.5. Red A number from 0 to 255. Default: 255. Green A number from 0 to 255. Default: 200. Blue A number from 0 to 255. Default: 0. Pulse On or off. Default: true. Limits (2) Objective markers at once 32 by default; hosts can raise it to 256. Above 64 the server may slow down. Visible things at once 128 by default; hosts can raise it to 1000. Above 200 the server may slow down.
action fx.marker_remove Copy link
Takes away an Objective Marker (the one wired in, or all of them with none).
Inputs (2) Run Flow Runs this node. Marker Entity Marker: an entity (a thing in the map). Optional. Outputs (1) Then Flow Goes on when it's done.
Trail
On Color (wins over the setting)
A colored trail behind a player or an entity as it moves (on), or none (off). It comes back after a respawn and when they start moving again.
Inputs (3) Run Flow Runs this node. On Entity On: an entity (a thing in the map). Needs a wire. Color (wins over the setting) Color A color to use instead of the Red, Green and Blue settings: wire a Color node (pick it with its picker), Make Color or a Color variable. Not wired: the Red, Green and Blue settings. Outputs (1) Then Flow Goes on when it's done. Settings (6) On On or off. Default: true. Red A number from 0 to 255. Default: 0. Green A number from 0 to 255. Default: 160. Blue A number from 0 to 255. Default: 255. Width A number from 1 to 50. Default: 6. Length (seconds) A number from 0.1 to 25. Default: 2. Limits (2) Trails at once 32 by default; hosts can raise it to 256. Above 64 the server may slow down. Effect messages a frame 48 by default; hosts can raise it to 64. Above 56 the server may slow down.
Effect Burst
At Position Color (wins over the setting)
A burst at a position or an entity: sparks, smoke, blood, a firework, an implosion, a tar explosion, a teleport flash, a lava splash or a colored flash. Count repeats it (up to 10); Color is for the firework and the flash.
Inputs (4) Run Flow Runs this node. At Entity At: an entity (a thing in the map). Position Vector The position. Optional. Color (wins over the setting) Color A color to use instead of the Red, Green and Blue settings: wire a Color node (pick it with its picker), Make Color or a Color variable. Not wired: the Red, Green and Blue settings. Outputs (1) Then Flow Goes on when it's done. Settings (5) Effect Pick one: Sparks, Smoke, Blood, Firework, Implosion, Tar explosion, Teleport flash, Lava splash, Colored flash (light). Default: sparks. Count# A number from 1 to 10. Default: 1. Red A number from 0 to 255. Default: 255. Green A number from 0 to 255. Default: 120. Blue A number from 0 to 255. Default: 0. Limits (1) Effect messages a frame 48 by default; hosts can raise it to 64. Above 56 the server may slow down.
action fx.beam_ents Copy link
A beam from one player or entity to another that follows both as they move, for some seconds. Effects are skipped (and the debugger says so) past 24 in one server frame, so many at once can't flood players' games.
Inputs (3) Run Flow Runs this node. From Entity From: an entity (a thing in the map). Needs a wire. To Entity To: an entity (a thing in the map). Needs a wire. Outputs (1) Then Flow Goes on when it's done. Settings (4) Color Pick one: Red, Green, Blue, White, Gold. Default: red. Seconds A number from 0.1 to 25. Default: 2. Width A number from 1 to 100. Default: 10. Wobble A number from 0 to 100. Default: 0. Limits (1) Effect messages a frame 48 by default; hosts can raise it to 64. Above 56 the server may slow down. Notes (1) Careful: Each beam is a temporary effect in every player's game, which has a shared limit; past 24 effects in one server frame the rest are skipped.
action fx.icon_over Copy link
A sprite floating over a player's head (the game's own, like sprites/iplayervip.spr, or your own), for some seconds or until removed (0), seen by everyone, a team or only Viewer. Remove takes the icons off that player.
Inputs (3) Run Flow Runs this node. Player Player The player. Needs a wire. Viewer Player Viewer: a player. Optional. Outputs (1) Then Flow Goes on when it's done. Settings (5) Do Pick one: Show, Remove. Default: show. Sprite Picked from this mode's own pieces. Default: sprites/iplayervip.spr. Seconds (0: until removed) A number from 0 to 600. Default: 0. Height above A number from 0 to 200. Default: 45. Seen by Pick one: Everyone, Terrorists, Counter-Terrorists, Only Viewer. Default: all. Limits (1) Effect messages a frame 48 by default; hosts can raise it to 64. Above 56 the server may slow down. Notes (1) The icon follows the player's head on everyone's screen who sees it. Seen by a team means the team at the moment it's shown. A sprite file that isn't on the server is left out (nothing shows).
action fx.sprite_at Copy link
Shows a sprite once at a position or an entity (the game's own or your own), at a size and brightness.
Inputs (3) Run Flow Runs this node. At Entity At: an entity (a thing in the map). Optional. Position Vector The position. Optional. Outputs (1) Then Flow Goes on when it's done. Settings (3) Sprite Picked from this mode's own pieces. Default: sprites/glow01.spr. Size A number from 0.1 to 25. Default: 1. Brightness A number from 0 to 255. Default: 200. Limits (1) Effect messages a frame 48 by default; hosts can raise it to 64. Above 56 the server may slow down.
A bullet tracer streak from one position to another.
Inputs (3) Run Flow Runs this node. From Vector From: a position or direction (X, Y, Z). Needs a wire. To Vector To: a position or direction (X, Y, Z). Needs a wire. Outputs (1) Then Flow Goes on when it's done. Limits (1) Effect messages a frame 48 by default; hosts can raise it to 64. Above 56 the server may slow down.
Dynamic Light
Follow (optional) At position Radius Seconds Fade (units a second)
A light that brightens what's around it for a moment: at a position, or following an entity (a player, a projectile) for the seconds given. Fade dims it over time (units a second; 0 stays bright until the end). Players see it in their own game.
Inputs (6) Run Flow Runs this node. Follow (optional) Entity Follow (optional): an entity (a thing in the map). Optional. At position Vector At position: a position or direction (X, Y, Z). Optional. Radius Number Radius: a number. Leave it empty to use the setting. Seconds Number Seconds: a number. Leave it empty to use the setting. Fade (units a second) Number Fade (units a second): a number. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (6) Red A number from 0 to 255. Default: 255. Green A number from 0 to 255. Default: 200. Blue A number from 0 to 255. Default: 120. Radius A number from 10 to 2550. A wire into the pin of the same name is used instead. Default: 200. Seconds A number from 0.1 to 25. A wire into the pin of the same name is used instead. Default: 1. Fade (units a second) A number from 0 to 2550. A wire into the pin of the same name is used instead. Default: 0. Limits (1) Effect messages a frame 48 by default; hosts can raise it to 64. Above 56 the server may slow down.
Puts a decal (a scorch, blood, a bullet hole...) on the surface nearest a position: it looks six ways from the point within Reach and paints the closest wall, floor or ceiling, or a door it hits. The game's own decals; they fade like any decal.
Inputs (4) Run Flow Runs this node. Near position Vector Near position: a position or direction (X, Y, Z). Needs a wire. Reach Number Reach: a number. Leave it empty to use the setting. Decal Decal The decal. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (2) Decal Pick one: Bullet hole, Big bullet hole, Scorch mark, Small scorch, Blood, Yellow blood, Broken glass, Lambda. A wire into the pin of the same name is used instead. Default: scorch. Reach A number from 8 to 512. A wire into the pin of the same name is used instead. Default: 64. Limits (1) Effect messages a frame 48 by default; hosts can raise it to 64. Above 56 the server may slow down.
Break Into Gibs
At entity At position Pieces# Speed Seconds Size Custom model (empty: the one above)
Pieces fly out from a position or an entity's middle, as when something breaks: wood, glass, metal, rocks, flesh, or your own model's parts (Custom model). Material is the sound they make. Size is how big the space they fly from is.
Inputs (8) Run Flow Runs this node. At entity Entity At entity: an entity (a thing in the map). Optional. At position Vector At position: a position or direction (X, Y, Z). Optional. Pieces# Number Pieces: a number. Leave it empty to use the setting. Speed Number Speed: a number. Leave it empty to use the setting. Seconds Number Seconds: a number. Leave it empty to use the setting. Size Number Size: a number. Leave it empty to use the setting. Custom model (empty: the one above) Model Custom model (empty: the one above): a model file (.mdl). Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (7) Model Pick one: Wood planks, Glass shards, Metal plates, Concrete chunks, Ceiling tiles, Computer parts, Rocks, Flesh. Default: wood. Custom model (empty: the one above) Picked from this mode's own pieces. A wire into the pin of the same name is used instead. Material sound Pick one: None, Glass, Metal, Flesh, Wood, Concrete. Default: wood. Pieces# A number from 1 to 255. A wire into the pin of the same name is used instead. Default: 8. Speed A number from 0 to 2000. A wire into the pin of the same name is used instead. Default: 200. Seconds A number from 0.1 to 25. A wire into the pin of the same name is used instead. Default: 2.5. Size A number from 1 to 512. A wire into the pin of the same name is used instead. Default: 16. Limits (1) Effect messages a frame 48 by default; hosts can raise it to 64. Above 56 the server may slow down.
Beam Ring
At entity At position Radius Seconds Width
A ring that grows out from a point, like a shockwave: radius, color, how long and how thick.
Inputs (6) Run Flow Runs this node. At entity Entity At entity: an entity (a thing in the map). Optional. At position Vector At position: a position or direction (X, Y, Z). Optional. Radius Number Radius: a number. Leave it empty to use the setting. Seconds Number Seconds: a number. Leave it empty to use the setting. Width Number Width: a number. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (6) Red A number from 0 to 255. Default: 255. Green A number from 0 to 255. Default: 255. Blue A number from 0 to 255. Default: 255. Radius A number from 8 to 4096. A wire into the pin of the same name is used instead. Default: 300. Seconds A number from 0.1 to 25. A wire into the pin of the same name is used instead. Default: 0.5. Width A number from 1 to 255. A wire into the pin of the same name is used instead. Default: 16. Limits (1) Effect messages a frame 48 by default; hosts can raise it to 64. Above 56 the server may slow down.
action snd.play_2d Copy link
A sound heard as is, not from a place: by one player, a team or everyone. Any sound: the game's own or yours. Volume 0 to 1, pitch 50 to 255 (100 normal). Map sounds are best mono: a stereo .wav is heard in the middle of your head, not from where it plays. Your own sounds (sound/custom/...wav) are loaded with the map and go with the mode when you publish it.
Inputs (5) Run Flow Runs this node. Player Player The player. Optional. Volume Number Volume: a number. Leave it empty to use the setting. Pitch Number Pitch: a number. Leave it empty to use the setting. Sound Sound The sound. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (4) Who hears it Pick one: Everyone, The player, Terrorists, Counter-Terrorists. Default: all. Sound Picked from this mode's own pieces. A wire into the pin of the same name is used instead. Default: buttons/bell1.wav. Volume A number from 0 to 1. A wire into the pin of the same name is used instead. Default: 1. Pitch A number from 50 to 255. A wire into the pin of the same name is used instead. Default: 100. Limits (1) Effect messages a frame 48 by default; hosts can raise it to 64. Above 56 the server may slow down.
action snd.play_at Copy link
Play Sound at Location
At entity At position Volume Pitch Sound
A sound from a place (a position, or where an entity is now), heard louder close by. Heard is how far it carries. Volume 0 to 1, pitch 50 to 255 (100 normal). Map sounds are best mono: a stereo .wav is heard in the middle of your head, not from where it plays. Your own sounds (sound/custom/...wav) are loaded with the map and go with the mode when you publish it.
Inputs (6) Run Flow Runs this node. At entity Entity At entity: an entity (a thing in the map). Optional. At position Vector At position: a position or direction (X, Y, Z). Optional. Volume Number Volume: a number. Leave it empty to use the setting. Pitch Number Pitch: a number. Leave it empty to use the setting. Sound Sound The sound. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (4) Sound Picked from this mode's own pieces. A wire into the pin of the same name is used instead. Default: ambience/thunder_clap.wav. Volume A number from 0 to 1. A wire into the pin of the same name is used instead. Default: 1. Pitch A number from 50 to 255. A wire into the pin of the same name is used instead. Default: 100. Heard Pick one: Everywhere, Far (large), Normal, Close by (small). Default: normal.
action snd.play_on Copy link
Play Sound on Entity
Entity or player Volume Pitch Sound
A sound that comes from an entity or a player and moves with it, on a channel (a new sound on the same channel replaces the last one). Volume 0 to 1, pitch 50 to 255 (100 normal). Map sounds are best mono: a stereo .wav is heard in the middle of your head, not from where it plays. Your own sounds (sound/custom/...wav) are loaded with the map and go with the mode when you publish it.
Inputs (5) Run Flow Runs this node. Entity or player Entity Entity or player: an entity (a thing in the map). Needs a wire. Volume Number Volume: a number. Leave it empty to use the setting. Pitch Number Pitch: a number. Leave it empty to use the setting. Sound Sound The sound. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (5) Sound Picked from this mode's own pieces. A wire into the pin of the same name is used instead. Default: items/gunpickup2.wav. Channel Pick one: Any free channel, Weapon, Voice, Item, Body, Stream, Static. Default: auto. Volume A number from 0 to 1. A wire into the pin of the same name is used instead. Default: 1. Pitch A number from 50 to 255. A wire into the pin of the same name is used instead. Default: 100. Heard Pick one: Everywhere, Far (large), Normal, Close by (small). Default: normal.
Loop Sound
On entity At position Volume Pitch Play again every (seconds) Sound
A sound that keeps playing at a spot, or riding on an entity, until Stop Sound gets its Handle (or the round ends with the entity). A .wav with loop points loops by itself; for one without, set Play again every (seconds). How many play at once is a mode setting (Limits: Loop sounds at once, 16 to start). Map sounds are best mono: a stereo .wav is heard in the middle of your head, not from where it plays. Your own sounds (sound/custom/...wav) are loaded with the map and go with the mode when you publish it.
Inputs (7) Run Flow Runs this node. On entity Entity On entity: an entity (a thing in the map). Optional. At position Vector At position: a position or direction (X, Y, Z). Optional. Volume Number Volume: a number. Leave it empty to use the setting. Pitch Number Pitch: a number. Leave it empty to use the setting. Play again every (seconds) Number Play again every (seconds): a number. Leave it empty to use the setting. Sound Sound The sound. Leave it empty to use the setting. Outputs (2) Then Flow Goes on when it's done. Handle Sound Loop Handle: a looping sound (a Sound Loop handle, to stop it later). Settings (5) Sound Picked from this mode's own pieces. A wire into the pin of the same name is used instead. Default: ambience/wind1.wav. Volume A number from 0 to 1. A wire into the pin of the same name is used instead. Default: 1. Pitch A number from 50 to 255. A wire into the pin of the same name is used instead. Default: 100. Heard Pick one: Everywhere, Far (large), Normal, Close by (small). Default: normal. Play again every (seconds; 0: it loops by itself) A number from 0 to 600. A wire into the pin of the same name is used instead. Default: 0. Limits (1) Loop sounds at once 16 by default; hosts can raise it to 256. Above 64 the server may slow down.
Stops a Loop Sound (its Handle), whatever plays on an entity's channel, or every sound a player hears now.
Inputs (4) Run Flow Runs this node. Loop handle Entity Loop handle: an entity (a thing in the map). Optional. Entity Entity The entity. Optional. Player Player The player. Optional. Outputs (1) Then Flow Goes on when it's done. Settings (2) Stop Pick one: A Loop Sound (Handle), An entity's channel, Everything a player hears. Default: loop. Channel Pick one: Any free channel, Weapon, Voice, Item, Body, Stream, Static. Default: auto.
action cast.objmarker Copy link
As Objective Marker
Success Failed Objective MarkerM
Casting: is this entity an objective marker? Success with it as that kind, else Failed. The one-click fix where an Entity wire goes into a pin of that kind.
Inputs (2) Run Flow Runs this node. Entity Entity The entity. Needs a wire. Outputs (3) Success Flow Runs on Success. Failed Flow Runs on Failed. Objective MarkerM Objective Marker The objective marker.
Made from the app's own catalog (nodes.json, nodehelp.json, limits.ts), so it matches the app.