Reference
World
36 Game Mode Studio nodes. Pick one for its pins, settings and limits.
value world.gravity Copy link
How strongly everyone falls (800 normal). (sv_gravity)
Outputs (1) Gravity Number Gravity: a number.
action world.set_gravity Copy link
How strongly everyone falls (800 normal). (sv_gravity)
Inputs (2) Run Flow Runs this node. Gravity Number Gravity: a number. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (1) Gravity A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 800.
value world.friction Copy link
How quickly players stop sliding (4 normal). (sv_friction)
Outputs (1) Friction Number Friction: a number.
action world.set_friction Copy link
How quickly players stop sliding (4 normal). (sv_friction)
Inputs (2) Run Flow Runs this node. Friction Number Friction: a number. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (1) Friction A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 4.
value world.max_speed Copy link
The fastest anyone can run (320 normal). (sv_maxspeed)
Outputs (1) Max Speed Number Max Speed: a number.
action world.set_max_speed Copy link
The fastest anyone can run (320 normal). (sv_maxspeed)
Inputs (2) Run Flow Runs this node. Max Speed Number Max Speed: a number. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (1) Max Speed A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 320.
value world.round_time Copy link
Minutes a round lasts. (mp_roundtime)
Outputs (1) Round Time Number Round Time: a number.
action world.set_round_time Copy link
Minutes a round lasts. (mp_roundtime)
Inputs (2) Run Flow Runs this node. Round Time Number Round Time: a number. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (1) Round Time A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 2.5.
value world.freeze_time Copy link
Seconds frozen at a round's start. (mp_freezetime)
Outputs (1) Freeze Time Number Freeze Time: a number.
action world.set_freeze_time Copy link
Seconds frozen at a round's start. (mp_freezetime)
Inputs (2) Run Flow Runs this node. Freeze Time Number Freeze Time: a number. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (1) Freeze Time A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 6.
value world.buy_time Copy link
Minutes players can buy after the round starts. (mp_buytime)
Outputs (1) Buy Time Number Buy Time: a number.
action world.set_buy_time Copy link
Minutes players can buy after the round starts. (mp_buytime)
Inputs (2) Run Flow Runs this node. Buy Time Number Buy Time: a number. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (1) Buy Time A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 0.25.
value world.friendly_fire Copy link
Can teammates hurt each other? (mp_friendlyfire)
Outputs (1) Friendly Fire Yes/No Friendly Fire: yes or no.
action world.set_friendly_fire Copy link
Can teammates hurt each other? (mp_friendlyfire)
Inputs (2) Run Flow Runs this node. Friendly Fire Yes/No Friendly Fire: yes or no. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (1) Friendly Fire On or off. A wire into the pin of the same name is used instead. Default: false.
value world.team_balance Copy link
Does the game move players to even the teams? (mp_autoteambalance)
Outputs (1) Team Balance Yes/No Team Balance: yes or no.
action world.set_team_balance Copy link
Does the game move players to even the teams? (mp_autoteambalance)
Inputs (2) Run Flow Runs this node. Team Balance Yes/No Team Balance: yes or no. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (1) Team Balance On or off. A wire into the pin of the same name is used instead. Default: true.
value world.team_limit Copy link
How many more players one team may have (0: no limit). (mp_limitteams)
Outputs (1) Team Limit Number Team Limit: a number.
action world.set_team_limit Copy link
How many more players one team may have (0: no limit). (mp_limitteams)
Inputs (2) Run Flow Runs this node. Team Limit Number Team Limit: a number. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (1) Team Limit A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 2.
value world.start_money Copy link
Money at the start. (mp_startmoney)
Outputs (1) Start Money Number Start Money: a number.
action world.set_start_money Copy link
Money at the start. (mp_startmoney)
Inputs (2) Run Flow Runs this node. Start Money Number Start Money: a number. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (1) Start Money A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 800.
value world.c4_timer Copy link
Seconds until a planted bomb explodes. (mp_c4timer)
Outputs (1) C4 Timer Number C4 Timer: a number.
action world.set_c4_timer Copy link
Seconds until a planted bomb explodes. (mp_c4timer)
Inputs (2) Run Flow Runs this node. C4 Timer Number C4 Timer: a number. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (1) C4 Timer A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 35.
value world.fall_damage Copy link
Falls hurt (realistic) or not. (mp_falldamage)
Outputs (1) Fall Damage Yes/No Fall Damage: yes or no.
action world.set_fall_damage Copy link
Falls hurt (realistic) or not. (mp_falldamage)
Inputs (2) Run Flow Runs this node. Fall Damage Yes/No Fall Damage: yes or no. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (1) Fall Damage On or off. A wire into the pin of the same name is used instead. Default: true.
value world.alltalk Copy link
Can everyone hear everyone's voice? (sv_alltalk)
Outputs (1) All Talk Yes/No All Talk: yes or no.
action world.set_alltalk Copy link
Can everyone hear everyone's voice? (sv_alltalk)
Inputs (2) Run Flow Runs this node. All Talk Yes/No All Talk: yes or no. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (1) All Talk On or off. A wire into the pin of the same name is used instead. Default: false.
value world.time_limit Copy link
Minutes before the map changes (0: none). (mp_timelimit)
Outputs (1) Time Limit Number Time Limit: a number.
action world.set_time_limit Copy link
Minutes before the map changes (0: none). (mp_timelimit)
Inputs (2) Run Flow Runs this node. Time Limit Number Time Limit: a number. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (1) Time Limit A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 20.
value world.win_limit Copy link
Rounds won before the map changes (0: none). (mp_winlimit)
Outputs (1) Win Limit Number Win Limit: a number.
action world.set_win_limit Copy link
Rounds won before the map changes (0: none). (mp_winlimit)
Inputs (2) Run Flow Runs this node. Win Limit Number Win Limit: a number. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (1) Win Limit A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 0.
value world.frag_limit Copy link
Kills before the map changes (0: none). (mp_fraglimit)
Outputs (1) Frag Limit Number Frag Limit: a number.
action world.set_frag_limit Copy link
Kills before the map changes (0: none). (mp_fraglimit)
Inputs (2) Run Flow Runs this node. Frag Limit Number Frag Limit: a number. Leave it empty to use the setting. Outputs (1) Then Flow Goes on when it's done. Settings (1) Frag Limit A number from 0 to 100000. A wire into the pin of the same name is used instead. Default: 0.
action world.weather Copy link
Rain, snow or clear weather for everyone or one player, kept through respawns (Counter-Strike 1.6 and Condition Zero draw it; how much depends on the player's settings).
Inputs (2) Run Flow Runs this node. Player (empty: everyone) Player Player (empty: everyone): a player. Optional. Outputs (1) Then Flow Goes on when it's done. Settings (1) Weather Pick one: Clear, Rain, Snow. Default: rain. Limits (1) Effect messages a frame 48 by default; hosts can raise it to 64. Above 56 the server may slow down. Notes (1) Players with weather effects turned off in their options see nothing; it's only looks (no sounds, no slowdown).
Fog of a color and thickness for everyone or one player (0 thickness: none), kept through respawns. It depends on the player's renderer: OpenGL draws it, software mode doesn't.
Inputs (2) Run Flow Runs this node. Player (empty: everyone) Player Player (empty: everyone): a player. Optional. Outputs (1) Then Flow Goes on when it's done. Settings (4) Red A number from 0 to 255. Default: 128. Green A number from 0 to 255. Default: 128. Blue A number from 0 to 255. Default: 128. Thickness A number from 0 to 0.05. Default: 0.002. Limits (1) Effect messages a frame 48 by default; hosts can raise it to 64. Above 56 the server may slow down. Notes (2) OpenGL draws fog; the software renderer doesn't. Thickness 0.001 to 0.005 is a light haze; 0.02 and up hides things a short way off.
Careful: Thick fog hides players from people but not from bots.
Made from the app's own catalog (nodes.json, nodehelp.json, limits.ts), so it matches the app.