Loner-StrikeReference

Reference

Effects

21 Game Mode Studio nodes. Pick one for its pins, settings and limits.

actionExplosionAn explosion at a position: the look and sound, and damage to players within the radius (0: none).actionBeamA beam of light from one position to another for some seconds.actionSet Light StyleHow bright the whole map is: normal, dark, darkest, bright, or flickering.actionObjective MarkerA sprite that floats over an entity (wired into Follow: a player, an NPC, an interactable, a component; it follows it) or at a position, for everyone, one team or one player.actionRemove MarkerTakes away an Objective Marker (the one wired in, or all of them with none).actionTrailA colored trail behind a player or an entity as it moves (on), or none (off).actionEffect BurstA burst at a position or an entity: sparks, smoke, blood, a firework, an implosion, a tar explosion, a teleport flash, a lava splash or a colored flash.actionBeam Between EntitiesA beam from one player or entity to another that follows both as they move, for some seconds.actionIcon Over PlayerA sprite floating over a player's head (the game's own, like sprites/iplayervip.spr, or your own), for some seconds or until removed (0), seen by everyone, a team or only Viewer.actionSprite AtShows a sprite once at a position or an entity (the game's own or your own), at a size and brightness.actionTracerA bullet tracer streak from one position to another.actionDynamic LightA light that brightens what's around it for a moment: at a position, or following an entity (a player, a projectile) for the seconds given.actionDecalPuts a decal (a scorch, blood, a bullet hole...) on the surface nearest a position: it looks six ways from the point within Reach and paints the closest wall, floor or ceiling, or a door it hits.actionBreak Into GibsPieces fly out from a position or an entity's middle, as when something breaks: wood, glass, metal, rocks, flesh, or your own model's parts (Custom model).actionBeam RingA ring that grows out from a point, like a shockwave: radius, color, how long and how thick.actionPlay Sound 2DA sound heard as is, not from a place: by one player, a team or everyone.actionPlay Sound at LocationA sound from a place (a position, or where an entity is now), heard louder close by.actionPlay Sound on EntityA sound that comes from an entity or a player and moves with it, on a channel (a new sound on the same channel replaces the last one).actionLoop SoundA sound that keeps playing at a spot, or riding on an entity, until Stop Sound gets its Handle (or the round ends with the entity).actionStop SoundStops a Loop Sound (its Handle), whatever plays on an entity's channel, or every sound a player hears now.actionAs Objective MarkerCasting: is this entity an objective marker?

Explosion

actionfx.explosion

An explosion at a position: the look and sound, and damage to players within the radius (0: none).

Inputs (3)
Run Flow
Runs this node.
Position Vector
The position. Needs a wire.
Damage Number
How much it hurts players near it (0: only the look and sound).
Outputs (1)
Then Flow
Goes on when it's done.
Settings (2)
Damage
A number from 0 to 500. A wire into the pin of the same name is used instead. Default: 0.
Radius
A number from 16 to 2000. Default: 250.
Notes (1)

Careful: With damage, it can kill players, and those count as deaths by the world.

Related:Beam

Beam

actionfx.beam

A beam of light from one position to another for some seconds.

Inputs (4)
Run Flow
Runs this node.
From Vector
From: a position or direction (X, Y, Z). Needs a wire.
To Vector
To: a position or direction (X, Y, Z). Needs a wire.
Color (wins over the setting) Color
A color to use instead of the Color choice: wire a Color node (pick it with its picker), Make Color or a Color variable. Not wired: the Color choice.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (2)
Color
Pick one: Red, Green, Blue, White, Gold. Default: red.
Seconds
A number from 0.1 to 25. Default: 1.
Related:Explosion

Set Light Style

actionfx.lights

How bright the whole map is: normal, dark, darkest, bright, or flickering.

Inputs (1)
Run Flow
Runs this node.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (1)
Light
Pick one: Normal, Dark, Darkest, Bright, Flickering. Default: normal.
Notes (1)

Changes the light of the whole map for everyone, until set back to Normal or the map changes.

Objective Marker

actionfx.marker

A sprite that floats over an entity (wired into Follow: a player, an NPC, an interactable, a component; it follows it) or at a position, for everyone, one team or one player. The sprite is one of the game's (sprites/arrow1.spr) or your own (sprites/...spr: it goes with the mode, like its other files). Remove it with Remove Marker; it goes by itself when what it follows is gone.

Inputs (6)
Run Flow
Runs this node.
Follow Entity
Follow: an entity (a thing in the map).
Position Vector
The position. Optional.
Player (for one player) Player
Player (for one player): a player. Optional.
Color (wins over the setting) Color
A color to use instead of the Red, Green and Blue settings: wire a Color node (pick it with its picker), Make Color or a Color variable. Not wired: the Red, Green and Blue settings.
Sprite Sprite
The sprite. Leave it empty to use the setting.
Outputs (2)
Then Flow
Goes on when it's done.
MarkerM Objective Marker
Marker: an objective marker (an Objective Marker handle).
Settings (8)
Sprite
Picked from this mode's own pieces. A wire into the pin of the same name is used instead. Default: sprites/arrow1.spr.
Seen by
Pick one: Everyone, Terrorists, Counter-Terrorists, The wired player. Default: all.
Height above
A number from 0 to 512. Default: 48.
Size
A number from 0.05 to 5. Default: 0.5.
Red
A number from 0 to 255. Default: 255.
Green
A number from 0 to 255. Default: 200.
Blue
A number from 0 to 255. Default: 0.
Pulse
On or off. Default: true.
Limits (2)
Objective markers at once
32 by default; hosts can raise it to 256. Above 64 the server may slow down.
Visible things at once
128 by default; hosts can raise it to 1000. Above 200 the server may slow down.

Remove Marker

actionfx.marker_remove

Takes away an Objective Marker (the one wired in, or all of them with none).

Inputs (2)
Run Flow
Runs this node.
Marker Entity
Marker: an entity (a thing in the map). Optional.
Outputs (1)
Then Flow
Goes on when it's done.

Trail

actionfun.trail

A colored trail behind a player or an entity as it moves (on), or none (off). It comes back after a respawn and when they start moving again.

Inputs (3)
Run Flow
Runs this node.
On Entity
On: an entity (a thing in the map). Needs a wire.
Color (wins over the setting) Color
A color to use instead of the Red, Green and Blue settings: wire a Color node (pick it with its picker), Make Color or a Color variable. Not wired: the Red, Green and Blue settings.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (6)
On
On or off. Default: true.
Red
A number from 0 to 255. Default: 0.
Green
A number from 0 to 255. Default: 160.
Blue
A number from 0 to 255. Default: 255.
Width
A number from 1 to 50. Default: 6.
Length (seconds)
A number from 0.1 to 25. Default: 2.
Limits (2)
Trails at once
32 by default; hosts can raise it to 256. Above 64 the server may slow down.
Effect messages a frame
48 by default; hosts can raise it to 64. Above 56 the server may slow down.

Effect Burst

actionfun.burst

A burst at a position or an entity: sparks, smoke, blood, a firework, an implosion, a tar explosion, a teleport flash, a lava splash or a colored flash. Count repeats it (up to 10); Color is for the firework and the flash.

Inputs (4)
Run Flow
Runs this node.
At Entity
At: an entity (a thing in the map).
Position Vector
The position. Optional.
Color (wins over the setting) Color
A color to use instead of the Red, Green and Blue settings: wire a Color node (pick it with its picker), Make Color or a Color variable. Not wired: the Red, Green and Blue settings.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (5)
Effect
Pick one: Sparks, Smoke, Blood, Firework, Implosion, Tar explosion, Teleport flash, Lava splash, Colored flash (light). Default: sparks.
Count#
A number from 1 to 10. Default: 1.
Red
A number from 0 to 255. Default: 255.
Green
A number from 0 to 255. Default: 120.
Blue
A number from 0 to 255. Default: 0.
Limits (1)
Effect messages a frame
48 by default; hosts can raise it to 64. Above 56 the server may slow down.

Beam Between Entities

actionfx.beam_ents

A beam from one player or entity to another that follows both as they move, for some seconds. Effects are skipped (and the debugger says so) past 24 in one server frame, so many at once can't flood players' games.

Inputs (3)
Run Flow
Runs this node.
From Entity
From: an entity (a thing in the map). Needs a wire.
To Entity
To: an entity (a thing in the map). Needs a wire.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (4)
Color
Pick one: Red, Green, Blue, White, Gold. Default: red.
Seconds
A number from 0.1 to 25. Default: 2.
Width
A number from 1 to 100. Default: 10.
Wobble
A number from 0 to 100. Default: 0.
Limits (1)
Effect messages a frame
48 by default; hosts can raise it to 64. Above 56 the server may slow down.
Notes (1)

Careful: Each beam is a temporary effect in every player's game, which has a shared limit; past 24 effects in one server frame the rest are skipped.

Icon Over Player

actionfx.icon_over

A sprite floating over a player's head (the game's own, like sprites/iplayervip.spr, or your own), for some seconds or until removed (0), seen by everyone, a team or only Viewer. Remove takes the icons off that player.

Inputs (3)
Run Flow
Runs this node.
Player Player
The player. Needs a wire.
Viewer Player
Viewer: a player. Optional.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (5)
Do
Pick one: Show, Remove. Default: show.
Sprite
Picked from this mode's own pieces. Default: sprites/iplayervip.spr.
Seconds (0: until removed)
A number from 0 to 600. Default: 0.
Height above
A number from 0 to 200. Default: 45.
Seen by
Pick one: Everyone, Terrorists, Counter-Terrorists, Only Viewer. Default: all.
Limits (1)
Effect messages a frame
48 by default; hosts can raise it to 64. Above 56 the server may slow down.
Notes (1)

The icon follows the player's head on everyone's screen who sees it. Seen by a team means the team at the moment it's shown. A sprite file that isn't on the server is left out (nothing shows).

Sprite At

actionfx.sprite_at

Shows a sprite once at a position or an entity (the game's own or your own), at a size and brightness.

Inputs (3)
Run Flow
Runs this node.
At Entity
At: an entity (a thing in the map). Optional.
Position Vector
The position. Optional.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (3)
Sprite
Picked from this mode's own pieces. Default: sprites/glow01.spr.
Size
A number from 0.1 to 25. Default: 1.
Brightness
A number from 0 to 255. Default: 200.
Limits (1)
Effect messages a frame
48 by default; hosts can raise it to 64. Above 56 the server may slow down.

Tracer

actionfx.tracer

A bullet tracer streak from one position to another.

Inputs (3)
Run Flow
Runs this node.
From Vector
From: a position or direction (X, Y, Z). Needs a wire.
To Vector
To: a position or direction (X, Y, Z). Needs a wire.
Outputs (1)
Then Flow
Goes on when it's done.
Limits (1)
Effect messages a frame
48 by default; hosts can raise it to 64. Above 56 the server may slow down.

Dynamic Light

actionfx.dlight

A light that brightens what's around it for a moment: at a position, or following an entity (a player, a projectile) for the seconds given. Fade dims it over time (units a second; 0 stays bright until the end). Players see it in their own game.

Inputs (6)
Run Flow
Runs this node.
Follow (optional) Entity
Follow (optional): an entity (a thing in the map). Optional.
At position Vector
At position: a position or direction (X, Y, Z). Optional.
Radius Number
Radius: a number. Leave it empty to use the setting.
Seconds Number
Seconds: a number. Leave it empty to use the setting.
Fade (units a second) Number
Fade (units a second): a number. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (6)
Red
A number from 0 to 255. Default: 255.
Green
A number from 0 to 255. Default: 200.
Blue
A number from 0 to 255. Default: 120.
Radius
A number from 10 to 2550. A wire into the pin of the same name is used instead. Default: 200.
Seconds
A number from 0.1 to 25. A wire into the pin of the same name is used instead. Default: 1.
Fade (units a second)
A number from 0 to 2550. A wire into the pin of the same name is used instead. Default: 0.
Limits (1)
Effect messages a frame
48 by default; hosts can raise it to 64. Above 56 the server may slow down.

Decal

actionfx.decal

Puts a decal (a scorch, blood, a bullet hole...) on the surface nearest a position: it looks six ways from the point within Reach and paints the closest wall, floor or ceiling, or a door it hits. The game's own decals; they fade like any decal.

Inputs (4)
Run Flow
Runs this node.
Near position Vector
Near position: a position or direction (X, Y, Z). Needs a wire.
Reach Number
Reach: a number. Leave it empty to use the setting.
Decal Decal
The decal. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (2)
Decal
Pick one: Bullet hole, Big bullet hole, Scorch mark, Small scorch, Blood, Yellow blood, Broken glass, Lambda. A wire into the pin of the same name is used instead. Default: scorch.
Reach
A number from 8 to 512. A wire into the pin of the same name is used instead. Default: 64.
Limits (1)
Effect messages a frame
48 by default; hosts can raise it to 64. Above 56 the server may slow down.

Break Into Gibs

actionfx.gibs

Pieces fly out from a position or an entity's middle, as when something breaks: wood, glass, metal, rocks, flesh, or your own model's parts (Custom model). Material is the sound they make. Size is how big the space they fly from is.

Inputs (8)
Run Flow
Runs this node.
At entity Entity
At entity: an entity (a thing in the map). Optional.
At position Vector
At position: a position or direction (X, Y, Z). Optional.
Pieces# Number
Pieces: a number. Leave it empty to use the setting.
Speed Number
Speed: a number. Leave it empty to use the setting.
Seconds Number
Seconds: a number. Leave it empty to use the setting.
Size Number
Size: a number. Leave it empty to use the setting.
Custom model (empty: the one above) Model
Custom model (empty: the one above): a model file (.mdl). Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (7)
Model
Pick one: Wood planks, Glass shards, Metal plates, Concrete chunks, Ceiling tiles, Computer parts, Rocks, Flesh. Default: wood.
Custom model (empty: the one above)
Picked from this mode's own pieces. A wire into the pin of the same name is used instead.
Material sound
Pick one: None, Glass, Metal, Flesh, Wood, Concrete. Default: wood.
Pieces#
A number from 1 to 255. A wire into the pin of the same name is used instead. Default: 8.
Speed
A number from 0 to 2000. A wire into the pin of the same name is used instead. Default: 200.
Seconds
A number from 0.1 to 25. A wire into the pin of the same name is used instead. Default: 2.5.
Size
A number from 1 to 512. A wire into the pin of the same name is used instead. Default: 16.
Limits (1)
Effect messages a frame
48 by default; hosts can raise it to 64. Above 56 the server may slow down.

Beam Ring

actionfx.ring

A ring that grows out from a point, like a shockwave: radius, color, how long and how thick.

Inputs (6)
Run Flow
Runs this node.
At entity Entity
At entity: an entity (a thing in the map). Optional.
At position Vector
At position: a position or direction (X, Y, Z). Optional.
Radius Number
Radius: a number. Leave it empty to use the setting.
Seconds Number
Seconds: a number. Leave it empty to use the setting.
Width Number
Width: a number. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (6)
Red
A number from 0 to 255. Default: 255.
Green
A number from 0 to 255. Default: 255.
Blue
A number from 0 to 255. Default: 255.
Radius
A number from 8 to 4096. A wire into the pin of the same name is used instead. Default: 300.
Seconds
A number from 0.1 to 25. A wire into the pin of the same name is used instead. Default: 0.5.
Width
A number from 1 to 255. A wire into the pin of the same name is used instead. Default: 16.
Limits (1)
Effect messages a frame
48 by default; hosts can raise it to 64. Above 56 the server may slow down.

Play Sound 2D

actionsnd.play_2d

A sound heard as is, not from a place: by one player, a team or everyone. Any sound: the game's own or yours. Volume 0 to 1, pitch 50 to 255 (100 normal). Map sounds are best mono: a stereo .wav is heard in the middle of your head, not from where it plays. Your own sounds (sound/custom/...wav) are loaded with the map and go with the mode when you publish it.

Inputs (5)
Run Flow
Runs this node.
Player Player
The player. Optional.
Volume Number
Volume: a number. Leave it empty to use the setting.
Pitch Number
Pitch: a number. Leave it empty to use the setting.
Sound Sound
The sound. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (4)
Who hears it
Pick one: Everyone, The player, Terrorists, Counter-Terrorists. Default: all.
Sound
Picked from this mode's own pieces. A wire into the pin of the same name is used instead. Default: buttons/bell1.wav.
Volume
A number from 0 to 1. A wire into the pin of the same name is used instead. Default: 1.
Pitch
A number from 50 to 255. A wire into the pin of the same name is used instead. Default: 100.
Limits (1)
Effect messages a frame
48 by default; hosts can raise it to 64. Above 56 the server may slow down.

Play Sound at Location

actionsnd.play_at

A sound from a place (a position, or where an entity is now), heard louder close by. Heard is how far it carries. Volume 0 to 1, pitch 50 to 255 (100 normal). Map sounds are best mono: a stereo .wav is heard in the middle of your head, not from where it plays. Your own sounds (sound/custom/...wav) are loaded with the map and go with the mode when you publish it.

Inputs (6)
Run Flow
Runs this node.
At entity Entity
At entity: an entity (a thing in the map). Optional.
At position Vector
At position: a position or direction (X, Y, Z). Optional.
Volume Number
Volume: a number. Leave it empty to use the setting.
Pitch Number
Pitch: a number. Leave it empty to use the setting.
Sound Sound
The sound. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (4)
Sound
Picked from this mode's own pieces. A wire into the pin of the same name is used instead. Default: ambience/thunder_clap.wav.
Volume
A number from 0 to 1. A wire into the pin of the same name is used instead. Default: 1.
Pitch
A number from 50 to 255. A wire into the pin of the same name is used instead. Default: 100.
Heard
Pick one: Everywhere, Far (large), Normal, Close by (small). Default: normal.

Play Sound on Entity

actionsnd.play_on

A sound that comes from an entity or a player and moves with it, on a channel (a new sound on the same channel replaces the last one). Volume 0 to 1, pitch 50 to 255 (100 normal). Map sounds are best mono: a stereo .wav is heard in the middle of your head, not from where it plays. Your own sounds (sound/custom/...wav) are loaded with the map and go with the mode when you publish it.

Inputs (5)
Run Flow
Runs this node.
Entity or player Entity
Entity or player: an entity (a thing in the map). Needs a wire.
Volume Number
Volume: a number. Leave it empty to use the setting.
Pitch Number
Pitch: a number. Leave it empty to use the setting.
Sound Sound
The sound. Leave it empty to use the setting.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (5)
Sound
Picked from this mode's own pieces. A wire into the pin of the same name is used instead. Default: items/gunpickup2.wav.
Channel
Pick one: Any free channel, Weapon, Voice, Item, Body, Stream, Static. Default: auto.
Volume
A number from 0 to 1. A wire into the pin of the same name is used instead. Default: 1.
Pitch
A number from 50 to 255. A wire into the pin of the same name is used instead. Default: 100.
Heard
Pick one: Everywhere, Far (large), Normal, Close by (small). Default: normal.

Loop Sound

actionsnd.loop

A sound that keeps playing at a spot, or riding on an entity, until Stop Sound gets its Handle (or the round ends with the entity). A .wav with loop points loops by itself; for one without, set Play again every (seconds). How many play at once is a mode setting (Limits: Loop sounds at once, 16 to start). Map sounds are best mono: a stereo .wav is heard in the middle of your head, not from where it plays. Your own sounds (sound/custom/...wav) are loaded with the map and go with the mode when you publish it.

Inputs (7)
Run Flow
Runs this node.
On entity Entity
On entity: an entity (a thing in the map). Optional.
At position Vector
At position: a position or direction (X, Y, Z). Optional.
Volume Number
Volume: a number. Leave it empty to use the setting.
Pitch Number
Pitch: a number. Leave it empty to use the setting.
Play again every (seconds) Number
Play again every (seconds): a number. Leave it empty to use the setting.
Sound Sound
The sound. Leave it empty to use the setting.
Outputs (2)
Then Flow
Goes on when it's done.
Handle Sound Loop
Handle: a looping sound (a Sound Loop handle, to stop it later).
Settings (5)
Sound
Picked from this mode's own pieces. A wire into the pin of the same name is used instead. Default: ambience/wind1.wav.
Volume
A number from 0 to 1. A wire into the pin of the same name is used instead. Default: 1.
Pitch
A number from 50 to 255. A wire into the pin of the same name is used instead. Default: 100.
Heard
Pick one: Everywhere, Far (large), Normal, Close by (small). Default: normal.
Play again every (seconds; 0: it loops by itself)
A number from 0 to 600. A wire into the pin of the same name is used instead. Default: 0.
Limits (1)
Loop sounds at once
16 by default; hosts can raise it to 256. Above 64 the server may slow down.

Stop Sound

actionsnd.stop

Stops a Loop Sound (its Handle), whatever plays on an entity's channel, or every sound a player hears now.

Inputs (4)
Run Flow
Runs this node.
Loop handle Entity
Loop handle: an entity (a thing in the map). Optional.
Entity Entity
The entity. Optional.
Player Player
The player. Optional.
Outputs (1)
Then Flow
Goes on when it's done.
Settings (2)
Stop
Pick one: A Loop Sound (Handle), An entity's channel, Everything a player hears. Default: loop.
Channel
Pick one: Any free channel, Weapon, Voice, Item, Body, Stream, Static. Default: auto.

As Objective Marker

actioncast.objmarker

Casting: is this entity an objective marker? Success with it as that kind, else Failed. The one-click fix where an Entity wire goes into a pin of that kind.

Inputs (2)
Run Flow
Runs this node.
Entity Entity
The entity. Needs a wire.
Outputs (3)
Success Flow
Runs on Success.
Failed Flow
Runs on Failed.
Objective MarkerM Objective Marker
The objective marker.

Made from the app's own catalog (nodes.json, nodehelp.json, limits.ts), so it matches the app.